Technologies services

Technical services
Homepage
/
Technologies services
/
Question and Solution
/
Question: Low battery voltage alarm (automatic series)

Question: Low battery voltage alarm (automatic series)

(Summary description)Problem Description: LOW BATTERY VOLTAGE warning light is on solution: 1. Check the battery voltage. The 12 volt battery has at least 12 volts. The 24 volt battery has at least 24 volts. 2. When the battery voltage is low when the generator is stationary, detach the battery and use another charger or run a diesel engine to charge 3. If the battery voltage is too low, but the power generation is running, it means that the diesel engine drives the charger not to charge, stop and check the fan belt 4. If the fan belt is not loose, check the charging AC diesel-driven charger, refer to "Diesel Engine Manual" 5. If the battery cannot be stored, replace the battery 6. Once the fault has been eliminated, press the reset button to clear the fault

Question: Low battery voltage alarm (automatic series)

(Summary description)Problem Description:
LOW BATTERY VOLTAGE warning light is on
solution:
1. Check the battery voltage. The 12 volt battery has at least 12 volts. The 24 volt battery has at least 24 volts.
2. When the battery voltage is low when the generator is stationary, detach the battery and use another charger or run a diesel engine to charge
3. If the battery voltage is too low, but the power generation is running, it means that the diesel engine drives the charger not to charge, stop and check the fan belt
4. If the fan belt is not loose, check the charging AC diesel-driven charger, refer to "Diesel Engine Manual"
5. If the battery cannot be stored, replace the battery
6. Once the fault has been eliminated, press the reset button to clear the fault

Information

Problem Description:

LOW BATTERY VOLTAGE warning light is on

solution:

1. Check the battery voltage. The 12 volt battery has at least 12 volts. The 24 volt battery has at least 24 volts.

2. When the battery voltage is low when the generator is stationary, detach the battery and use another charger or run a diesel engine to charge

3. If the battery voltage is too low, but the power generation is running, it means that the diesel engine drives the charger not to charge, stop and check the fan belt

4. If the fan belt is not loose, check the charging AC diesel-driven charger, refer to "Diesel Engine Manual"

5. If the battery cannot be stored, replace the battery

6. Once the fault has been eliminated, press the reset button to clear the fault

Previous: Question: Diesel engine start failure (applicable to all control panels)
Next: Question: Alarm not in automatic mode (IG-CU series)
Previous: Question: Diesel engine start failure (applicable to all control panels)
Next: Question: Alarm not in automatic mode (IG-CU series)

Copyright © 2009 300.cn All Rights Reserved

300.cn Beijing  闽ICP备09005104号-1